HP mp5001 User's Guide 1.1 - iPod plus HP (color) - Page 62

If Songs or Data Transfer More Slowly Over USB 2.0 • If you transfer a large amount of songs or data using USB 2.0 and the iPod battery is low, iPod goes into a power-saving mode. Transfer speeds slow down considerably. This is normal. • If you want to transfer at higher speeds, you can stop the transfer, eject the iPod, and connect it to a power outlet using the iPod Power Adapter. Let iPod charge for about an hour, then connect it to your PC again to transfer music. If You Connect iPod to a USB Port and It Doesn't Work Correctly • You must use a USB 2.0 port or a FireWire port to connect iPod. USB 1.1 is not supported and is significantly slower than FireWire and USB 2.0. If your PC doesn't have a FireWire port or USB 2.0 port, you can purchase and install a Windows-certified USB 2.0 card and install it. If you're using a PC that doesn't have a high-power USB 2.0 port but has a 6-pin FireWire port, you can connect iPod to a FireWire port using the optional iPod Dock Connector to FireWire Cable, available at http://www.hpshopping.com/musicaccessories • To charge the battery, you must connect iPod to a high-power USB 2.0 port on your PC. Connecting iPod to a USB port on your keyboard will not charge the battery. • If your iPod is exceptionally low on power and you connect it to a USB 2.0 port, it may charge for up to 30 minutes before you can use it. Leave iPod connected until it charges sufficiently. • If you're connecting iPod to a portable or notebook PC using the iPod Dock Connector to USB 2.0 Cable, connect the PC to a power outlet before connecting iPod. 62 Tips and Troubleshooting