HP nx6130 HP Compaq nx6130 Series Notebook PC - Maintenance and Service Guide - Page 135

Remove the cables from the clips, board and shield to the base enclosure.

Page 135 highlights

Removal and Replacement Procedures 2. Position the notebook with the rear panel toward you. 3. Disconnect the USB cable 1 and audio cable 2 from the system board. 4. Remove the PM1.5×3.0 screw 3 that secures the USB/audio board and shield to the base enclosure. 5. Remove the cables from the clips 4 in the base enclosure. 6. Remove the USB/audio board 5. Removing the USB/Audio Board Reverse the above procedure to install the USB/audio board. Maintenance and Service Guide 6-49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199

Removal and Replacement Procedures
Maintenance and Service Guide
6–49
2. Position the notebook with the rear panel toward you.
3. Disconnect the USB cable
1
and audio cable
2
from the
system board.
4. Remove the PM1.5×3.0 screw
3
that secures the USB/audio
board and shield to the base enclosure.
5. Remove the cables from the clips
4
in the base enclosure.
6. Remove the USB/audio board
5
.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.