HP nx6130 HP Compaq nx6130 Series Notebook PC - Maintenance and Service Guide - Page 138
Remove the T8M2.0×4.0 screw, Remove the two HM5.0×9.0 screw locks
View all HP nx6130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Removal and Replacement Procedures 3. Disconnect the serial connector cable 1 and the Bluetooth cable 2 from the system board. 4. Remove the T8M2.0×4.0 screw 3 that secures the system board to the base enclosure next to the RJ-11 connector. 5. Remove the two HM5.0×9.0 screw locks 4 on each side of the parallel connector. 6. Remove the two HM5.0×9.0 screw locks 5 on each side of the external monitor connectors. Removing the System Board Screws and Screw Locks 6-52 Maintenance and Service Guide
6–52
Maintenance and Service Guide
Removal and Replacement Procedures
3. Disconnect the serial connector cable
1
and the Bluetooth
cable
2
from the system board.
4. Remove the T8M2.0×4.0 screw
3
that secures the system
board to the base enclosure next to the RJ-11 connector.
5. Remove the two HM5.0×9.0 screw locks
4
on each side of
the parallel connector.
6. Remove the two HM5.0×9.0 screw locks
5
on each side of
the external monitor connectors.
Removing the System Board Screws and Screw Locks