HP nx6130 HP Compaq nx6130 Series Notebook PC - Maintenance and Service Guide - Page 142
Reverse the above procedures to install the serial connector
View all HP nx6130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Removal and Replacement Procedures 3. Remove the two HM5.0×9.0 screw locks 1 on each side of the serial connector. 4. Lift the serial connector module and cable out of the base enclosure 2. 5. Disconnect the serial connector module cable from the system board 3. Removing the Serial Connector Module Reverse the above procedures to install the serial connector module. 6-56 Maintenance and Service Guide
6–56
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the two HM5.0×9.0 screw locks
1
on each side of
the serial connector.
4. Lift the serial connector module and cable out of the base
enclosure
2
.
5. Disconnect the serial connector module cable from the
system board
3
.
Removing the Serial Connector Module
Reverse the above procedures to install the serial connector
module.