HP nx6320 Maintenance and Service Guide - Page 141
Remove the Mini Card WWAN module, Mini Card WWAN modules are designed with notches
View all HP nx6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Removal and Replacement Procedures 3. Make note of which antenna cable is attached to which antenna clip on the Mini Card WWAN module before disconnecting the cables, then disconnect the auxiliary and main antenna cables 1 from the module. 4. Remove the two Phillips PM2.0×4.0 screws 2 that secure the Mini Card WWAN module to the computer. 5. Remove the Mini Card WWAN module 3 by pulling the module from the socket at an angle. ✎ Mini Card WWAN modules are designed with notches 4 to prevent incorrect installation. Removing a Mini Card WWAN Module Reverse the above procedure to install a Mini Card WWAN module. Maintenance and Service Guide 5-39
Removal and Replacement Procedures
Maintenance and Service Guide
5–39
3. Make note of which antenna cable is attached to which
antenna clip on the Mini Card WWAN module before
disconnecting the cables, then disconnect the auxiliary and
main antenna cables
1
from the module.
4. Remove the two Phillips PM2.0×4.0 screws
2
that secure
the Mini Card WWAN module to the computer.
5. Remove the Mini Card WWAN module
3
by pulling the
module from the socket at an angle.
✎
Mini Card WWAN modules are designed with notches
4
to
prevent incorrect installation.
Removing a Mini Card WWAN Module
Reverse the above procedure to install a Mini Card WWAN
module.