HP nx6320 Maintenance and Service Guide - Page 162
Remove the Phillips PM2.0×3.0 screw, that secures
View all HP nx6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Removal and Replacement Procedures 2. Position the computer with the rear panel toward you. 3. Release the ZIF connector to which the USB/audio board cable is connected and disconnect the USB/audio board cable 1. 4. Remove the Phillips PM2.0×3.0 screw 2 that secures the USB/audio board to the base enclosure. 5. Remove the cable from the clips in the base enclosure. 6. Remove the USB/audio board 3. Removing the USB/Audio Board Reverse the above procedure to install the USB/audio board. 5-60 Maintenance and Service Guide
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
2. Position the computer with the rear panel toward you.
3. Release the ZIF connector to which the USB/audio board
cable is connected and disconnect the USB/audio
board cable
1
.
4. Remove the Phillips PM2.0×3.0 screw
2
that secures the
USB/audio board to the base enclosure.
5. Remove the cable from the clips in the base enclosure.
6. Remove the USB/audio board
3
.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.