HP rp2470 rp24xx A180 User Manual - Page 56
Operating System Software Installation - server solution
View all HP rp2470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
A-Class Server Installation A-Class Server Power Up and Boot Procedures Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Return to Configure the Web Browser and Configure The integrated A-Class Web Console Software. Operating System Software Installation HP-UX may be installed from removable media (DDS or CDROM) or via a LAN (Ignite-UX). A-Class servers require a server firmware version of 39.32 or later to use Ignite-UX. A-Class server firmware is Customer installable and is available as a firmware patch from the Hewlett Packard Information Technology Resource Center (HPITRC) at http://us-support2.external.hp.com/. Refer to patch installation instructions to install this firmware patch on A-Class servers. Refer to the web-based documentation at http://docs.hp.com/ for information on how to configure and use Ignite-UX. This is a temporary solution for rebuilding an A-Class system from removable media (diskette or CD) only. This procedure is required because the 10.20 Core Install media does not include the "btlan3" drivers that you will need for networking support. This solution is for the HP-UX 10.20 operating system with an Independent Peripheral Release (IPR) of October 198 (9810) only. It is not needed for HP-UX 11.0 IPR 9810. Step 1. Install HP-UX 10.20 for HP 9000 series 800 servers from removable media: • Load Core Install media into either CDROM or DDS. • Change Alternate Path to match the path of the device containing the install media. • Boot from alternate path If you are using a DDS: The console will display: Main Menu> Type: co Press Enter. The console will next display: Configuration Menu> Type: pa alt 8/16/5.0 Press Enter. The console will next display: Configuration Menu> Type: au bo on Press Enter. The console will next display: Configuration Menu> Type: bo alt Press Enter. The following query will then be displayed: Interact with IPL (Y, N, or Cancel)? Type: no Press Enter. The console will then display a menu. Select: 56 Chapter 2