HP st5747 Hardware Reference Guide HP st5742/st5747 Streaming Thin Clients - Page 20
Replacing the Secure USB Compartment Cover,
View all HP st5747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Replacing the Secure USB Compartment Cover To replace the secure compartment cover: 1. Place the cover on top of the unit so it is offset about 1.27 cm (1/2 inch) toward the rear of the unit, allowing the tabs on the cover to align and insert into the slots on the chassis (1). 2. Slide the cover toward the back of the unit until it locks in place and the cover is flush with the front panel of the chassis (2). 3. Replace the screw (3). Figure 2-2 Replacing the secure compartment cover 14 Chapter 2 Hardware Changes ENWW
Replacing the Secure USB Compartment Cover
To replace the secure compartment cover:
1.
Place the cover on top of the unit so it is offset about 1.27 cm (1/2 inch) toward the rear of the unit,
allowing the tabs on the cover to align and insert into the slots on the chassis (1).
2.
Slide the cover toward the back of the unit until it locks in place and the cover is flush with the front
panel of the chassis (2).
3.
Replace the screw (3).
Figure 2-2
Replacing the secure compartment cover
14
Chapter 2
Hardware Changes
ENWW