HP st5747 Hardware Reference Guide HP st5742/st5747 Streaming Thin Clients - Page 28
Installing the PCI Express Expansion Module and PCI Express Card, External Drives,
View all HP st5747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
6. Replace the access plate: Figure 2-12 Replacing the SO-DIMM access plate a. Insert the tab on the front edge into its slot and set the plate into position. NOTE: You may need to press lightly on the access plate to position it properly against the chassis. b. Replace the two screws to secure the access plate to the chassis. 7. Slide the serial number tab into its slots. Installing the PCI Express Expansion Module and PCI Express Card Before beginning the replacement process, review General Hardware Installation Sequence on page 11 for procedures you should follow before and after installing or replacing hardware. WARNING! Before removing the side access panel, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet. Follow the installation instructions included in the PCIe Expansion Module option kit. External Drives Various external USB drives are available as options for the st5742/st5747. For more information about these drives, visit http://h10010.www1.hp.com/wwpc/us/en/sm/WF12a/12454-12454-321959.html, or refer to the instructions that accompany the option. For more information about available options, visit the HP Web site at http://h10010.www1.hp.com/ wwpc/us/en/sm/WF12a/12454-12454-321959.html. 22 Chapter 2 Hardware Changes ENWW