HP t520 Administrator Guide 5 - Page 146
root/Network/VPN/PPTP/Gateway
View all HP t520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Registry key Description root/Network/IPSec/IPSecRules// QMESPEnable Enables phase 2 ESP. root/Network/IPSec/IPSecRules// QMESPEncryptionAlg Sets the phase 2 ESP encryption algorithm. root/Network/IPSec/IPSecRules// QMESPIntegrityAlg Sets the phase 2 ESP integrity algorithm. root/Network/IPSec/IPSecRules// QMLifetimeSeconds Sets the phase 2 lifetime. root/Network/IPSec/IPSecRules// RuleDescription Sets the description for the IPSec rule. root/Network/IPSec/IPSecRules// RuleEnable If set to 1, the rule is enabled. root/Network/IPSec/IPSecRules//RuleName Sets the name for the IPSec rule. root/Network/IPSec/IPSecRules//SrcAddr Sets the source address for the IPSec rule. root/Network/IPSec/IPSecRules// TunnelDstAddr Sets the tunnel destination address for the IPSec rule. root/Network/IPSec/IPSecRules// TunnelEnable Enables tunnel mode for the IPSec rule. root/Network/IPSec/IPSecRules// TunnelSrcAddr Sets the tunnel source address for the IPSec rule. root/Network/KeepPreviousDNS If set to 1, previously-configured DNS servers and search domains not generated by the Network Manager will be kept in resolv.conf. If set to 0, resolv.conf will be overwritten completely. root/Network/SearchDomains Additional search domains for FQDN resolution can be specified here. The specified domains will be appended to any incomplete server definitions in an attempt to generate an FQDN that can be resolved via DNS. For example, a search domain of mydomain.com will allow the server definition myserver to resolve properly to myserver.mydomain.com, even if the DNS server does not have myserver in its name resolution tables. Up to five additional search domains can be specified. root/Network/VPN/AutoStart If set to 1, VPN starts automatically when the system starts up. root/Network/VPN/PPTP/Domain root/Network/VPN/PPTP/Gateway Sets the PPTP domain. Sets the PPTP gateway. root/Network/VPN/PPTP/Password Sets the PPTP user password. root/Network/VPN/PPTP/Username Sets the PPTP username. root/Network/VPN/Type root/Network/VPN/VPNC/DPDEndianess Sets the VPN type. Sets the endianness of the DPD sequence number (see rfc3706). 0: big endian; 1: little endian. Try toggling this if the session aborts intermittently for no apparent reason. root/Network/VPN/VPNC/DPDInterval Sets the DPD interval (see rfc3706) in seconds. root/Network/VPN/VPNC/DebugLevel Sets the debug level to either 0, 1, 2, 3, or 99. This generates a lot of logs. Enable this only when you need to troubleshoot a VPN issue. 134 Appendix D Registry keys