HP t520 Administrator Guide 5 - Page 151
for EAP PEAP, Security/EAPFAST/PACFile
View all HP t520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Registry key root/Network/Wireless/Profiles//IPv4/ SubnetMask root/Network/Wireless/Profiles//IPv6/ Address root/Network/Wireless/Profiles//IPv6/ DefaultGateway root/Network/Wireless/Profiles//IPv6/ Enabled root/Network/Wireless/Profiles//IPv6/ Method root/Network/Wireless/Profiles//IPv6/ SubnetMask root/Network/Wireless/Profiles// PowerEnable root/Network/Wireless/Profiles// Priority root/Network/Wireless/Profiles//SSID root/Network/Wireless/Profiles// SSIDHidden root/Network/Wireless/Profiles// Security/EAPFAST/AnonyIdentity root/Network/Wireless/Profiles// Security/EAPFAST/FastProvision root/Network/Wireless/Profiles// Security/EAPFAST/PACFile root/Network/Wireless/Profiles// Security/EAPFAST/Password root/Network/Wireless/Profiles// Security/EAPFAST/Username root/Network/Wireless/Profiles// Security/EAPPEAP/AnonyIdentity root/Network/Wireless/Profiles// Security/EAPPEAP/CACert root/Network/Wireless/Profiles// Security/EAPPEAP/InnerAuth Description HP does not recommend using Static in a generic client profile, because all clients using that profile would use the same IP address. Sets the subnet mask of the device, such as 255.255.255.0 (for a standard class C subnet). This setting takes effect only if Method is set to Static. Sets the IPv6 address of the client. This setting takes effect only if Method is set to Static. Sets the default gateway the device uses to communicate with the Internet. Typically, this Is the IP address of the router. This setting takes effect only if Method is set to Static. If set to 1, IPv6 is enabled for this profile. If set to Automatic, the client uses DHCP to attempt to retrieve network settings. If set to Static, the values of the Address, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile, because all clients would use the same IP address. Sets the subnet mask of the device, which is usually the IPv6 prefix length. This setting takes effect only if Method is set to Static. If set to 1, power management of the wireless network card is enabled. Defines the priority of the network. For a wireless network, a larger number means a higher priority. High priority is preferred for a wireless network connection. Sets the wireless access point to use via SSID. Specifies whether the SSID of the wireless access point is hidden. Sets the anonymous identity for EAP-FAST authentication. Sets the provisioning option for EAP-FAST authentication. Sets the path to the PAC file for EAP-FAST authentication. Sets the password for EAP-FAST authentication. Sets the username for EAP-FAST authentication. Sets the anonymous identity for EAP PEAP authentication. Sets the path to the CA certificate file for EAP PEAP authentication. Sets the PEAP inner authentication protocol. Network 139