HP vp6300 HP vp6300 Series Digital Projector - User's Guide - Page 19
Connecting power
View all HP vp6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting power 1. Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front of the screen. Ideally, the platform should be lower than the bottom of the screen. 2. Connect one end of the power cord to the back of the projector 1 and the other end to a grounded electrical outlet 2. 3. Turn on the main disconnect switch 3 on the back of the projector. If you want to permanently install the projector on the ceiling or behind the screen, see "Installing the projector" on page 49. Setting up the projector 19
Setting up the projector
19
Connecting power
1.
Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front of the screen.
Ideally, the platform should be lower than the bottom of the screen.
2.
Connect one end of the power cord to the back of the projector
1
and the other end to a
grounded electrical outlet
2
.
3.
Turn on the main disconnect switch
3
on the back of the projector.
If you want to permanently install the projector on the ceiling or behind the screen, see
“Installing the projector” on page 49.