HP vp6300 HP vp6300 Series Digital Projector - User's Guide - Page 50

Installing for rear projection, Locking the projector

Get HP vp6300 - Digital Projector PDF manuals and user guides View all HP vp6300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

1. Attach the projector to the ceiling using an HP ceiling mount kit. Refer to the installation instructions provided with the ceiling mount kit. 2. After the projector is mounted on the ceiling, adjust the projector settings to match this setup. Press enter, go to Setup > Advanced setup > Projector position, and select Front Ceiling. Installing for rear projection 1. Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is designed for rear projection. See "Setting up the projector" on page 16 or "Installing on the ceiling" on page 49 for more instructions. 2. Press enter, go to Setup > Advanced setup > Projector position. Then select Rear Table or Rear Ceiling. Locking the projector The projector includes a built in slot to secure the projector with a cable and lock (such as the Kensington MicroSaver lock system, available at many computer stores). 1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip knot around the stationary object, and be sure it cannot slip off. 2. Insert the lock 1 into the hole and twist the key 2. 50 Installing Permanently

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Installing Permanently
50
1.
Attach the projector to the ceiling using an HP ceiling mount kit. Refer to the installation
instructions provided with the ceiling mount kit.
2.
After the projector is mounted on the ceiling, adjust the projector settings to match this
setup. Press
enter,
go to
Setup > Advanced setup > Projector position,
and select
Front
Ceiling.
Installing for rear projection
1.
Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is designed for
rear projection.
See “Setting up the projector” on page 16 or “Installing on the ceiling” on page 49 for
more instructions.
2.
Press
enter
,
go to
Setup > Advanced setup > Projector position.
Then select
Rear Table
or
Rear Ceiling.
Locking the projector
The projector includes a built in slot to secure the projector with a cable and lock (such as the
Kensington MicroSaver lock system, availab
l
e at many computer stores).
1.
Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip
knot around the stationary object, and be sure it cannot slip off.
2.
Insert the lock
1
into the hole and twist the key
2
.