Home » HP Manuals » Projectors » HP vp6300 » Manual Viewer

HP vp6300 HP vp6300 Series Digital Projector - User's Guide - Page 47

Upgrading the projector

Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Upgrading the projector Updating the firmware HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help. Check for updated versions at http://www.hp.com/go/proj_firmware. USB method 1. On a computer with a USB port, go to the HP projector upgrade website (see introduction for this section) and download the latest file intended for a USB upgrade. 2. Connect a USB cable (available from HP) between the USB port on the projector and the USB port on the computer. 3. On the computer, run the file you downloaded by double-clicking the file. Follow the onscreen instructions. Upgrading the projector 47

Section	Page
Title Page	1
Contents	3
Safety precautions 7	3
What’s in the box? 8	3
Identifying common features 9	3
Setting up the projector 16	3
Turning the projector on and off 26	3
Making basic adjustments 28	3
Using the remote control 29	3
Showing a computer screen 31	3
Selecting a different source 31	3
Hiding or showing the picture 31	3
Adjusting the picture and sound 33	3
Using the on-screen menu 38	4
Performing routine maintenance 43	4
Upgrading the projector 47	4
Installing the projector 49	4
Connecting to a room controller 52	4
Troubleshooting suggestions 59	4
Testing the projector 64	4
Specifications 65	5
Safety information 68	5
Regulatory information 69	5
Setting Up	7
Safety precautions	7
What’s in the box?	8
Identifying common features	9
Projector at a glance	9
Projector buttons and lights	11
Back panel	12
Remote control	14
Accessories	15
Setting up the projector	16
Positioning the projector	16
Connecting power	19
Connecting a computer	20
Connecting a handheld organizer	21
Connecting a video source	22
Connecting a DVI source	22
Connecting a component-video source	23
Connecting an S-video source	24
Connecting a composite-video source	25
Turning the projector on and off	26
Turning the projector on	26
Turning the projector off	27
Moving the projector	27
Making basic adjustments	28
Aiming the projector	28
Adjusting the focus and zoom	28
Using the remote control	29
Showing Presentations	31
Showing a computer screen	31
Selecting a different source	31
Hiding or showing the picture	31
Adjusting the Projector	33
Adjusting the picture and sound	33
Choosing the best picture mode	33
Adjusting the shape of the picture	34
Adjusting a slanted picture	35
Adjusting the picture for best color	36
Adjusting other picture settings	36
Adjusting the volume	37
Adjusting other sound settings	37
Adjusting the projector setup	37
Preventing unauthorized use	37
Using the on-screen menu	38
Changing settings using the on-screen menu	38
Input menu	39
Picture menu	40
Sound menu	41
Setup menu	41
Help menu	42
Maintaining the Projector	43
Performing routine maintenance	43
Getting the projector status	43
Cleaning the projector lens	43
Replacing the lamp module	44
Replacing the battery in the remote control	46
Upgrading the projector	47
Updating the firmware	47
USB method	47
Installing Permanently	49
Installing the projector	49
Choosing cables	49
Installing on a table	49
Installing on the ceiling	49
Installing for rear projection	50
Locking the projector	50
Controlling an external accessory	51
Connecting to a room controller	52
Serial connections	52
Examples of room controller commands	52
Room controller commands	54
Fixing Problems	59
Troubleshooting suggestions	59
Warning light problems	59
If both red warning lights are blinking:	59
If the red temperature light is on or blinking:	59
If the red lamp light is on or blinking:	59
If the red lamp light is flickering quickly:	60
Start-up problems	60
If no lights or sounds turn on:	60
Picture problems	60
If a “scanning” or “waiting” message is displayed on a blank screen:	60
If the wrong input source is displayed:	60
If the image is out of focus:	60
If an upside-down or reversed image is displayed:	61
If the image is too small or too large:	61
If the image has slanted sides:	61
If the image is stretched:	61
If the projected colors seem slightly wrong:	61
If the projected colors seem completely wrong:	61
If the picture is not clear (ghost images, smearing, poor quality):	62
If several picture settings seem completely wrong and you cannot fix them:	62
If a scrolling or cut-off image is displayed for a computer connection:	62
If the image is flickering or unstable for a computer connection:	62
If the image disappears from the computer screen:	62
If text or lines from a computer display seem rough or uneven:	62
Sound problems	63
If no sound is coming out of the projector:	63
Interruption problems	63
If the projector stops responding to all controls:	63
If the lamp shuts off during a show:	63
If the lamp burns out or makes a popping sound:	63
Remote control problems	63
If the remote control does not operate:	63
Testing the projector	64
Running the projector diagnostics	64
Reference	65
Specifications	65
Safety information	68
LED safety	68
Mercury safety	68
Regulatory information	69
U.S.A.	69
Canada	69
Japan	70
Korea	70
International	70

Match case Limit results 1 per page

Upgrading the projector

Updating the firmware

HP might periodically release updated versions of the projector firmware to enhance the

projector performance. The projector firmware version is shown in the on-screen menu at

Help

Check for updated versions at http://www.hp.com/go/proj_firmware.

USB method

On a computer with a USB port, go to the HP projector upgrade website (see introduction

for this section) and download the latest file intended for a USB upgrade.

Connect a USB cable (available from HP) between the USB port on the projector and the

USB port on the computer.

On the computer, run the file you downloaded by double-clicking the file. Follow the on-

screen instructions.