Hikvision DS-2CD6D42G0-IS User Manual - Page 45
Set NAS, 1.4 eMMC
View all Hikvision DS-2CD6D42G0-IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Network Camera User Manual 4. Check Enable Automatic Network Replenishment. Note Upload to FTP/Memory Card/NAS in Linkage Method and Enable Automatic Network Replenishment should be both enabled simultaneously. 5. Click Test to verify the FTP server. 6. Click Save. 5.1.3 Set NAS Take network server as network disk to store the record files, captured images, etc. Before You Start Get the IP address of the network disk first. Steps 1. Go to NAS setting page: Configuration → Storage → Storage Management → Net HDD . 2. Click HDD No.. Enter the server address and file path for the disk. Server Address The IP address of the network disk. File Path The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected. 3. Click Test to check whether the network disk is available. 4. Click Save. 5.1.4 eMMC Protection It is to automatically stop the use of eMMC as a storage media when its health status is poor. Note The eMMC protection is only supported by certain device models with an eMMC hardware. Go to Configuration → System → Maintenance → System Service for the settings. eMMC, short for embedded multimedia card, is an embedded non-volatile memory system. It is able to store the captured images or videos of the device. The device monitors the eMMC health status and turns off the eMMC when its status is poor. Otherwise, using a worn-out eMMC may lead to device boot failure. 28