Hikvision DS-2CD6D42G0-IS User Manual - Page 67
Set Auto Port Mapping, 4.2 Set Manual Port Mapping, 4.3 Set Port Mapping on Router
View all Hikvision DS-2CD6D42G0-IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Network Camera User Manual 2. Select the port mapping mode. Auto Port Mapping Refer to Set Auto Port Mapping for detailed information. Manual Port Mapping Refer to Set Manual Port Mapping for detailed information. 3. Click Save. 7.4.1 Set Auto Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the camera, or you can use the default name. 2. Select the port mapping mode to Auto. 3. Click Save. Note UPnP™ function on the router should be enabled at the same time. 7.4.2 Set Manual Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default name. 2. Select the port mapping mode to Manual, and set the external port to be the same as the internal port. 3. Click Save. What to do next Go to the router port mapping settings interface and set the port number and IP address to be the same as those on the device. For more information, refer to the router user manual. 7.4.3 Set Port Mapping on Router The following settings are for a certain router. The settings vary depending on different models of routers. Steps 1. Select the WAN Connection Type. 2. Set the IP Address, Subnet Mask and other network parameters of the router. 3. Go to Forwarding → Virtual Severs , and input the Port Number and IP Address. 4. Click Save. 50