Hikvision DS-2CD6D42G0-IS User Manual - Page 88
Set IP Address Filter, 16.3 Set MAC Address Filter
View all Hikvision DS-2CD6D42G0-IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Network Camera User Manual 9.16.2 Set IP Address Filter IP address filter is a tool for access control. You can enable the IP address filter to allow or forbid the visits from the certain IP addresses. IP address refers to IPv4. Steps 1. Go to Configuration → System → Security → IP Address Filter . 2. Check Enable IP Address Filter. 3. Select the type of IP address filter. Forbidden IP addresses in the list cannot access the device. Allowed Only IP addresses in the list can access the device. 4. Edit the IP address filter list. Add Add a new IP address or IP address range to the list. Modify Modify the selected IP address or IP address range in the list. Delete Delete the selected IP address or IP address range in the list. 5. Click Save. 9.16.3 Set MAC Address Filter MAC address filter is a tool for access control. You can enable the MAC address filter to allow or forbid the visits from the certain MAC addresses. Steps 1. Go to Configuration → System → Security → MAC Address Filter . 2. Check Enable MAC Address Filter. 3. Select the type of MAC address filter. Forbidden MAC addresses in the list cannot access the device. Allowed Only MAC addresses in the list can access the device. 4. Edit the MAC address filter list. Add Add a new MAC address to the list. Modify Modify the selected MAC address in the list. Delete Delete the selected MAC address in the list. 5. Click Save. 71