Hikvision DS-2CD6D42G0-IS User Manual - Page 89
Set HTTPS, 16.5 Set QoS, 16.6 Set IEEE 802.1X
View all Hikvision DS-2CD6D42G0-IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Network Camera User Manual 9.16.4 Set HTTPS HTTPS is a network protocol that enables encrypted transmission and identity authentication, which improves the security of remote access. Steps 1. Go to Configuration → Network → Advanced Settings → HTTPS . 2. Check Enable to access the camera via HTTP or HTTPS protocol. 3. Check Enable HTTPS Browsing to access the camera only via HTTPS protocol. 4. Select the Server Certificate. 5. Click Save. Note If the function is abnormal, check if the selected certificate is abnormal in Certificate Management. 9.16.5 Set QoS QoS (Quality of Service) can help improve the network delay and network congestion by setting the priority of data sending. Note QoS needs support from network device such as router and switch. Steps 1. Go to Configuration → Network → Advanced Configuration → QoS . 2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP. Note Network can identify the priority of data transmission. The bigger the DSCP value is, the higher the priority is. You need to set the same value in router while configuration. 3. Click Save. 9.16.6 Set IEEE 802.1X IEEE 802.1x is a port-based network access control. It enhances the security level of the LAN/ WLAN. When devices connect to the network with IEEE 802.1x standard, the authentication is needed. Go to Configuration → Network → Advanced Settings → 802.1X , and enable the function. Set Protocol and EAPOL Version according to router information. Protocol 72