Home » Hikvision Manuals » Security Cameras » Hikvision IDS-2CD7AC5G0-IZHSY 2.8-12mm » Manual Viewer

Hikvision IDS-2CD7AC5G0-IZHSY 2.8-12mm User Manual - Page 76

Set DST, Steps, Configuration, System, System Settings, Enable DST, Start Time, End Time, DST Bias,

View all Hikvision IDS-2CD7AC5G0-IZHSY 2.8-12mm manuals

Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual 4. Click Save. Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function. Steps 1. Go to Configuration → System → System Settings → DST. 2. Check Enable DST. 3. Select Start Time, End Time and DST Bias. 4. Click Save. Set RS-485 RS-485 is used to connect the device to an external device. You can use RS-485 to transmit the data between the device and the computer or terminal when the communication distance is too long. Before You Start Connect the device and computer or terminal with an RS-485 cable. Steps 1. Go to Configuration → System → System Settings → RS-485. 2. Set the RS-485 parameters. You should keep the parameters of the device and the computer or terminal all the same. 3. Click Save. Set RS-232 RS-232 can be used to debug device or access peripheral device. RS-232 can realize communication between the device and computer or terminal when the communication distance is short. Before You Start Connect the device to computer or terminal with an RS-232 cable. Steps 1. Go to Configuration → System → System Settings → RS-232. 2. Set RS-232 parameters to match the device with computer or terminal. 3. Click Save. UM iDS-2CD7xxG0-xxxxx 021021NA 76

Section	Page
Legal Information	2
About this Manual	2
Trademarks	2
Disclaimer	2
Symbol Conventions	2
Safety Instruction	3
Laws and Regulations	3
Transportation	3
Power Supply	3
System Security	3
Battery	3
Maintenance	3
Environment	4
Emergency	4
Time Synchronization	4
Contents	5
Chapter 1 System Requirements	10
Chapter 2 Device Activation and Accessing	11
2	11
2.1 Activate the Device via SADP	11
Before You Start	11
Steps	11
2.2 Activate the Device via Browser	11
Steps	11
2.3 Login	12
2.3.1 Plug-in Installation	12
2.3.2 Admin Password Recovery	13
Illegal Login Lock	13
Chapter 3 Live View	14
3	14
3.1 Live View Parameters	14
3.1.1 Enable and Disable Live View	14
3.1.2 Adjust Aspect Ratio	14
Steps	14
3.1.3 Live View Stream Type	14
3.1.4 Select Third-Party Plug-in	14
3.1.5 Window Division	15
3.1.6 Light	15
3.1.7 Count Pixel	15
Steps	15
3.1.8 Start Digital Zoom	15
Steps	15
3.1.9 Auxiliary Focus	15
3.1.10 Lens Initialization	15
3.1.11 Quick Set Live View	16
Steps	16
3.1.12 Lens Parameters Adjustment	16
3.1.13 Conduct 3D Positioning	17
Steps	17
3.2 Set Transmission Parameters	17
Steps	17
3.3 Set Smooth Streaming	18
Before You Start	18
Steps	18
Chapter 4 Video and Audio	20
4	20
4.1 Video Settings	20
4.1.1 Stream Type	20
Steps	20
4.1.2 Video Type	20
4.1.3 Resolution	21
4.1.4 Bitrate Type and Max. Bitrate	21
4.1.5 Video Quality	21
4.1.6 Frame Rate	21
4.1.7 Video Encoding	21
4.1.8 Smoothing	22
4.2 ROI	22
4.2.1 Set ROI	23
Before You Start	23
Steps	23
4.2.2 Set Face Tracking ROI	23
Steps	23
4.2.3 Set Target Tracking ROI	24
Before You Start	24
Steps	24
4.2.4 Set License Plate Tracking ROI	24
Steps	24
4.3 Display Info. on Stream	24
Steps	24
4.4 Audio Settings	25
4.4.1 Audio Encoding	25
4.4.2 Audio Input	25
4.4.3 Audio Output	25
4.4.4 Environmental Noise Filter	25
4.5 Two-Way Audio	25
Before You Start	25
Steps	25
4.6 Display Settings	26
4.6.1 Scene Mode	26
4.6.2 Image Parameters Switch	28
Steps	28
4.6.3 Video Standard	28
4.6.4 Local Video Output	28
4.7 OSD	29
4.8 Set Privacy Mask	29
Steps	29
4.9 Overlay Picture	29
Before You Start	29
Steps	30
4.10 Set Target Cropping	30
Steps	30
Chapter 5 Video Recording and Picture Capture	31
5	31
5.1 Storage Settings	31
5.1.1 Set Memory Card	31
Before You Start	31
Steps	31
Detect Memory Card Status	31
Before You Start	31
Steps	31
Unlock	32
5.1.2 Set FTP	32
Before You Start	32
Steps	32
Picture Name	33
5.1.3 Set NAS	33
Before You Start	33
Steps	33
Mounting Type	33
5.1.4 eMMC Protection	34
5.1.5 Set Cloud Storage	34
Steps	34
5.2 Video Recording	34
5.2.1 Record Automatically	34
Before You Start	34
Steps	35
5.2.2 Record Manually	35
Steps	35
5.2.3 Set Lite Storage	36
Steps	36
5.2.4 Playback and Download Video	36
Steps	36
5.3 Capture Configuration	37
5.3.1 Capture Automatically	37
Before You Start	37
Steps	37
5.3.2 Capture Manually	37
Steps	37
5.3.3 View and Download Pictures	38
Steps	38
Chapter 6 Events and Alarms	39
6	39
6.1 Basic Event	39
6.1.1 Set Motion Detection	39
Steps	39
Expert Mode	39
Steps	39
Normal Mode	40
Steps	40
6.1.2 Set Video Tampering Alarm	41
Steps	41
6.1.3 Set PIR Alarm	42
Steps	42
6.1.4 Set Exception Alarm	42
Steps	42
6.1.5 Set Alarm Input	43
Before You Start	43
Steps	43
6.1.6 Set Video Quality Diagnosis	43
Steps	44
6.1.7 Set Vibration Detection	44
Steps	44
6.2 Smart Event	44
6.2.1 Detect Audio Exception	45
Steps	45
6.2.2 Set Defocus Detection	45
Steps	45
6.2.3 Detect Scene Change	46
Steps	46
6.2.4 Set Face Detection	46
Steps	46
6.2.5 Set Video Loss	46
Steps	46
6.2.6 Set Intrusion Detection	47
Steps	47
6.2.7 Set Line Crossing Detection	48
Steps	48
6.2.8 Set Region Entrance Detection	49
Steps	49
6.2.9 Set Region Exiting Detection	49
Steps	49
6.2.10 Set Unattended Baggage Detection	50
Steps	50
6.2.11 Set Object Removal Detection	51
Steps	51
6.2.12 Draw Area	52
Steps	52
6.2.13 Set Size Filter	52
Steps	52
Chapter 7 Network Settings	53
7	53
7.1 TCP/IP	53
7.1.1 Multicast	53
7.1.2 Multicast Discovery	54
7.2 SNMP	54
Before You Start	54
Steps	54
7.3 Set SRTP	54
Steps	54
7.4 Port Mapping	55
Before You Start	55
Steps	55
7.4.1 Set Auto Port Mapping	55
Steps	55
7.4.2 Set Manual Port Mapping	55
Steps	55
What To Do Next	56
7.4.3 Set Port Mapping on Router	56
Steps	56
7.5 Port	56
7.6 Access to Device via Domain Name	57
Before You Start	57
Steps	57
NO-IP	57
7.7 Access to Device via PPPoE Dial Up Connection	58
Steps	58
7.8 Wireless Dial	58
7.8.1 Set Wireless Dial	59
Before You Start	59
Steps	59
7.8.2 Set White List	59
Steps	59
7.9 Wi-Fi	60
7.9.1 Connect Wi-Fi Manually	60
Before You Start	60
Steps	60
What To Do Next	60
7.9.2 Connect Wi-Fi Automatically	60
Use PBC	61
Before You Start	61
Steps	61
Use PIN on Device	62
Steps	62
Use PIN on Router	62
Before You Start	62
Steps	62
7.10 Set Network Service	63
Steps	63
7.11 Set ONVIF	63
Steps	64
7.12 Set Alarm Server	64
Steps	64
7.13 Access Camera via Hik-Connect	64
Before You Start	64
Steps	64
7.13.1 Enable Hik-Connect Service on Camera	65
Enable Hik-Connect Service via Web Browser	65
Before You Start	65
Steps	65
Enable Hik-Connect Service via SADP Software	66
Steps	66
7.13.2 Set Up Hik-Connect	66
Steps	66
7.13.3 Add Camera to Hik-Connect	67
Steps	67
Chapter 8 Arming Schedule and Alarm Linkage	68
8	68
8.1 Set Arming Schedule	68
Steps	68
8.2 Linkage Method Settings	68
8.2.1 Trigger Alarm Output	68
Steps	68
Manual Alarm	68
Steps	69
Automatic Alarm	69
Steps	69
8.2.2 FTP/NAS/Memory Card Uploading	69
8.2.3 Send E-mail	69
Set E-mail	70
Before You Start	70
Steps	70
8.2.4 Notify Surveillance Center	70
8.2.5 Trigger Recording	70
8.2.6 Flashing Light	71
Set Flashing Alarm Light Output	71
Steps	71
8.2.7 Audible Warning	71
Set Audible Alarm Output	71
Steps	71
Chapter 9 System and Security	73
9	73
9.1 View Device Information	73
9.2 Search and Manage Log	73
Steps	73
9.3 Simultaneous Login	73
9.4 Import and Export Configuration File	73
9.5 Export Diagnose Information	73
9.6 Reboot	73
9.7 Restore and Default	74
Steps	74
9.8 Upgrade	74
Before You Start	74
Steps	74
9.9 View Open Source Software License	74
9.10 Time and Date	74
9.10.1 Synchronize Time Manually	75
Steps	75
9.10.2 Set NTP Server	75
Before You Start	75
Steps	75
9.10.3 Synchronize Time by Satellite	75
Steps	75
9.10.4 Set DST	76
Steps	76
9.11 Set RS-485	76
Before You Start	76
Steps	76
9.12 Set RS-232	76
Before You Start	76
Steps	76
9.13 External Device	77
9.13.1 Supplement Light Settings	77
9.14 Security	77
9.14.1 Authentication	77
9.14.2 Set IP Address Filter	78
Steps	78
9.14.3 Set HTTPS	78
Steps	78
9.14.4 Set QoS	79
Steps	79
9.14.5 Set IEEE 802.1x	79
9.14.6 Control Timeout Settings	79
9.14.7 Search Security Audit Logs	80
Steps	80
9.14.8 Security Reinforcement	80
9.15 Certificate Management	80
9.15.1 Create Self-Signed Certificate	80
Steps	80
9.15.2 Create Certificate Request	81
Before You Start	81
Steps	81
9.15.3 Import Certificate	81
Steps	81
9.15.4 Install Server/Client Certificate	81
Steps	81
9.15.5 Install CA Certificate	82
Steps	82
9.15.6 Enable Certificate Expiration Alarm	82
Steps	82
9.16 User and Account	82
9.16.1 Set User Account and Permission	82
Steps	83
9.16.2 Simultaneous Login	83
9.16.3 Online Users	83
Chapter 10 Allocate VCA Resource	84
Steps	84
10	84
10.1 Face Capture	84
10.1.1 Set Face Capture	84
Before You Start	84
Result	85
10.1.2 Overlay and Capture	85
10.1.3 Face Capture Algorithms Parameters	86
10.1.4 Set Shield Region	87
Steps	87
10.2 Road Traffic	87
10.2.1 Set Vehicle Detection	87
Before You Start	87
Steps	87
10.2.2 Set Mixed-Traffic Detection Rule	88
Before You Start	88
Steps	88
10.2.3 Uploading Pictures Settings	89
10.2.4 Camera Settings	89
10.2.5 Import or Export Blacklist & Whitelist	89
Steps	89
10.3 Multi-Target-Type Detection	90
10.3.1 Set Multi-Target-Type Detection Rule	90
Steps	90
Min. Pupil Distance	90
What To Do Next	90
10.3.2 Overlay and Capture	90
10.3.3 Multi-Target-Type Detection Algorithm Parameters	91
10.3.4 Set Shield Region	92
Steps	92
10.4 Face Counting	92
10.4.1 Set Face Counting Detection Rule	92
Steps	92
10.4.2 Overlay and Capture	93
10.4.3 Face Counting Algorithm Parameters	94
10.4.4 View Face Counting Result	94
Steps	94
10.5 Queue Management	94
10.5.1 Set Regional People Queuing-Up	95
Before You Start	95
10.5.2 Set Waiting Time Detection	95
Before You Start	95
Steps	96
10.5.3 Queue Management Statistics	96
Before You Start	96
Steps	97
Multi-Level Comparison	97
10.6 Counting	97
10.6.1 Set Counting	97
Steps	97
10.6.2 View Counting Statistics	98
Before You Start	98
Steps	98
10.7 Hard Hat Detection	98
10.7.1 Set Hard Hat Detection	99
Before You Start	99
Steps	99
10.8 Face Comparison and Modeling	99
10.8.1 Face Comparison	99
Set Face Picture Library	99
Steps	99
Set Face Picture Comparison	101
Before You Start	101
Steps	101
View Face Comparison Result	101
Steps	101
10.8.2 Face Modeling	102
Before You Start	102
Steps	102
Chapter 11 Open Platform	103
11	103
11.1 Set Open Platform	103
Chapter 12 Set EPTZ	104
Before You Start	104
Steps	104
Chapter 13 Smart Display	105
Layout Preview	105
Detection Attribute	105
Appendix A: Device Command	106