Hitachi 26LD9000TA Owners Guide - Page 32

FUNCTION (continued) Size Switching Each time button of the remote control is pressed, the screen display size is switched in sequence, and the status will be displayed at the bottom of the screen. TV/AV signal input TV/AV1/AV2/AV3/AV4 /HDMI 4:3 Panoramic Picture Size Full Cinema You can display the image at optimum condition by selecting display size depending on the current output image as shown below. Current Output Image (Input Signal) Display Size To display suitable screen as follows. 4:3 Play a 4:3 image on screen faithfully. Blanking occurs on both sides. (4:3 Signal) Panoramic Play a 4:3 image which enlarges horizontal and vertical size of the middle in equal scales, and displays both sides appearing much wider. (Cinema) Cinema Play a 21:9 image in 4:3 image (Cinema size) expanding vertically. *In some case, slight blanking may remain at the top and bottom. (Squeeze) Full Play a 4:3 image faithfully in the standard vertical size and horizontally squeezed. Information Aspect ratio represents horizontal : vertical ratio on screen. 16 16(or 21) NOTE The size will fix as Full mode and not change when receiving the AV3,4 component signal, HDMI signal of 720p/50,720p/60,1080i/50, 1080i/60. 93 9 4 CAUTION Using a wide-screen television z This television has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image would appear different form the original. Take this into consideration when making screen mode choices. z Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for commercial or public viewing purposes could infringe on the copyright holder's right protected by Copyright Law. z When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image reflecting original intention. 32