Hitachi 26LD9000TA Owners Guide - Page 37

ENGLISH TROUBLESHOOTING(continued) Symptom and Check List (continued) Symptoms z No picture The Indicating lamp ĺ Off z No picture The Indicating lamp ĺ Orange It means that the unit is in "Power Save mode". z No picture The indicating lamp ĺ Green z The top of the television and surface of the panel heat up. Check list z Check if the Power Cord is plugged into the socket firmly. z Check if the Main Power is ON. z Check if all the cables of the external equipments are connected correctly and firmly. z Check if the power of the external equipments is ON. z Check if the TV/AV mode has been selected correctly. z Check if the PC is in Power Save mode or not. z Refer to "Power Save mode" and "When following messages appears on the screen" z Check if the signal cable is connected correctly and firmly. z Adjust the level of Brightness and Contrast lower. z It may happen when you use the unit for long hours. Turn off the Main Power of the unit for a while. Please note that this is not malfunction. z Image cannot be displayed in the correct position. z When the VCR is in special playback features (Fast forward or Rewind), the screen gets dark and cannot see the image at all. z Screen display size cannot be switched correctly. z Cannot be displayed the image from HDMI. z Press button to check if the input signal of the displayed image is compatible with the specification of the television. z It could happen when the VCR is connected to Component output, such as 480i. This is not malfunction. z Try Composite output or S-video output and check the picture again. z The display size is fixed at "Full" when the receiving signals are 1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz. z Check the signal status by pressing the control. button on the remote z Check if the cables are connected correctly. z Check the output format of the equipments. z (Please refer to "Connecting Procedure" and "Recommended Signal List".) Page 14 , 19 35 14 ~ 18 39 , 41 25 , 39 , 41 32 , 33 40 ~ 41 37