Hitachi 42HDT79 Owners Guide - Page 68

Setup Set The Inputs Use this feature to give a name to any of the five video Setup inputs. Set The Menu Options OR Set The Screen Saver 1. Press the CURSOR PAD ̆ or ̄ to highlight the video inputs. Set The Inputs Set The AV Net Set The Closed Captions 2. Press the CURSOR PAD ̇ or ̈ to select your choices. Set The Output Terminals Set The Quick Start Options Reset The Software Move SEL Select Note: The inputs labeled Gray out (Skip) or Hide (Skip) are disabled in the INPUTS selection. INPUT 4 Auto Link Use this function to automatically turn the TV on and tune to INPUT 4 when it detects a video signal to INPUT 4. 1. Use the CURSOR PAD ̆, ̄, ̇ or ̈ to highlight and select the AUTO LINK setting of your choice. Setup Set The Inputs Input1 : **** Input2 : **** Input3 : **** Input4 : **** Auto Link : Off Input5 : **** Move SEL Return - Auto When AUTO is selected, the TV will turn on and switch to INPUT 4 automatically, when the INPUT 4 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player or DVD player. - Remote When REMOTE is selected, the TV will turn on and switch to INPUT 4 automatically when the INPUT 4 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed. This is convenient when you want to record a movie with your VCR and watch it later. - Off Select OFF to disable this function. 2. Press EXIT to quit menu or select SET THE INPUTS to return to previous menu. NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above. 2. When using REMOTE mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button. 3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours. Set AV Net (only HDX model) Use this feature to control your external Audio/Video equipment using your HITACHI Plasma TV Remote Control. The IR Blaster cable must be properly connected for the AV NET feature to work. 1. Press the MENU button. 2. Use the CURSOR PAD ̄ or CHANNEL WHEEL to highlight SETUP. Set AV NET 3. Press the SELECT button to select. 4. Use the CURSOR PAD ̄ or CHANNEL WHEEL to highlight SET AV NET feature. 5. Press the SELECT button to select. Video Audio TV Guide On Screen Channel Manager Locks Timers Setup Power Swivel Move SEL Select Setup Set The Menu Options OR Set The Screen Saver Set The Inputs Set The AV Net Set The Closed Captions Set The Output Terminals Set The Quick Start Options Reset The Software Move SEL Select On-Screen Display 68