Hitachi C52-WD9000 Owners Guide - Page 34

34

MULTI PICTURE

P in P

Follow the steps on page 21 to enter the

Function

menu and

select the

Multi Picture

option, then enter the

Multi Picture

menu and select the

Multi Picture

option as shown on the

right.

Press the

cursor buttons to set the

Multi Picture

option to

P in P

mode, then exit from the menu.

In normal TV mode, press the

MULTI PIC.

button to

enter the

P in P

mode as shown below. The picture A and

B will show two programs of two channels respectively.

Once you enter the

P in P

mode, press the

A/B

button to

select any one of the two pictures and the red

symbol will appear on the top of the selected

picture, indicating:

1

The speakers on this TV output the sound from the

selected picture.

2

The monitor out terminals output audio and video

signals from the selected picture.

3

The operations such as program selection, etc. are

valid for the selected picture. However, the program

No. selected in one picture can not be the same as

that in the other one. Otherwise the characters

! Not

Available

will appear.

Notes:

When the

RECALL

button is pressed, the picture A and B will display their respective program No. instantly,

and the red

symbol will appear on the top of the selected picture momentarily.

After accessing the

P in P

mode, you can press the

SWAP

button to switch between the two pictures, ie, to

exchange the program sources in the picture A and B.

Press the

POSITION

button to move the picture B on the screen in sequence as shown above. Do not fix the

picture B on a particular position of the screen for a long time, or else, it will damage the PRT.

In the

P in P

mode, you can press the

MULTI PIC.

or the

RETURN

button to exit.

In the

P in P

mode

you may enter the

Audio

menu by pressing the

MENU

button to make adjustment. When

entering other menus such as

Picture

, it will exit from the

P in P

mode.

Note:

Not all input signal formats are valid for

P in P

. Even if the signal may be displayed in TV mode before

entering

P in P

, it may not be displayed while in the

P in P

mode. In such case, the characters

! Invalid

Signal

will appear in the picture A, or the

!

symbol will appear in the picture B. This is normal.

A

B

Hitachi C52-WD9000 Owners Guide - Page 34

Function, Multi Picture, P in P, MULTI PIC., Available, RECALL, POSITION, RETURN, Audio, Picture,

Page 34 highlights