Hitachi CP-X3010N User Manual - Page 36
Description, Mirror, Standby Mode, Audio Out, Monitor Out, Computer
![]() |
UPC - 050585151710
View all Hitachi CP-X3010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SETUP menu Item Description Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT STANDBY MODE MONITOR OUT If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (59) will be displayed when projector is restarted after the AC power is turned off. Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. NORMAL ó SAVING When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below: • When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled while the projector is in the standby mode. If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE, all of the RS-232C commands are disabled (48). • When SAVING is selected, AUDIO OUT STANDBY setting of AUDIO SOURCE (37) is invalid, and no signal is output from AUDIO OUT port in the standby mode. The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using ▲/▼ buttons. COMPUTER IN1 ó COMPUTER IN2 STANDBY COMPONENT VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr) • Choose STANDBY, to select the output signal from the MONITOR OUT port in the standby mode. STANDBY settings can be selected individually for NORMAL or SAVING, which is selected in the STANDBY MODE (above). (2) Select one of the COMPUTER IN ports using ◄/► buttons. Choosing the COMPUTER IN1 allows the following choice. COMPUTER IN1 ó OFF Choosing the COMPUTER IN2 allows the following choice. COMPUTER IN2 ó OFF Choosing other input or STANDBY allows the following choice. COMPUTER IN1 ó COMPUTER IN2 ó OFF • OFF disables the MONITOR OUT port. • Initial settings for STANDBY are the following: COMPUTER IN1 when NORMAL is selected in STANDBY MODE; and OFF when SAVING is selected in STANDBY MODE. 36
![](/manual_guide/products/hitachi-cpx3010n-user-manual-332a1d4/36.png)