Hitachi CP-X3010N User Manual - Page 73
Either the focus and/or horizontal phase settings are
![]() |
UPC - 050585151710
View all Hitachi CP-X3010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. Reference page 27 Pictures appear The ECO MODE function is working. dark. Select NORMAL for the ECO MODE item in the SETUP 35 menu. The lamp is approaching the end of its product lifetime. Replace the lamp. 62, 63 Pictures appear blurry. Either the focus and/or horizontal phase settings are not properly adjusted. Adjust the focus using the focus ring, and/or H PHASE using the menu function. The lens is dirty or misty. Clean the lens referring to the section "Caring for the lens". 19, 31 67 The SAVING function is working. Select NORMAL for STANDBY MODE item in the SETUP 36 menu. RS-232C does not work. The COMMUNICATION TYPE for the CONTROL port is set to NETWORK BRIDGE. Select OFF for COMMUNICATION TYPE item in the 48 OPTION - SERVICE - COMMUNICATION menu. Network does not work The SAVING function is working. Select NORMAL for STANDBY MODE item in the SETUP menu. 36 NETWORK The NETWORK BRIDGE function is turned off. BRIDGE Select NETWORK BRIDGE for COMMUNICATION TYPE function does item in the OPTION - SERVICE - COMMUNICATION menu. 48 not work Schedule The SAVING function is working. function does Select NORMAL for STANDBY MODE item in the SETUP 36 not work menu. NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. 73
![](/manual_guide/products/hitachi-cpx3010n-user-manual-332a1d4/73.png)