Hitachi CP-X3010N User Manual - Page 49
Description, Service, Continued, Communication, Response Limit Time, Control, Bytes Interval Timeout
![]() |
UPC - 050585151710
View all Hitachi CP-X3010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
OPTION menu Item Description RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF ó 1s ó 2s ó 3s SERVICE (continued) OFF: Select this mode if it is not required to check the responses from the device that the projector sends data to. In this mode, the projector can send out data from the computer continuously. 1s /2s /3s: Select the time period to keep the projector waiting for response from the device that the projector sends data to. While waiting the response, the projector does not send out any data from the CONTROL port. COMMUNICATION (continued) • This menu is available only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE and the HALF-DUPLEX is selected for the TRANSMISSION METHOD (48). • OFF is selected as the default setting. BYTES INTERVAL TIMEOUT Select the blank time length to judge that the response data has finished in the communicating in the condition of the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. 50ms ó 100ms ó 150ms ó 200ms (continued on next page) • This menu is available only when NETWORK BRIDGE is selected for the COMMUNICATION TYPE and HALF-DUPLEX is selected for the TRANSMISSION METHOD (48). • 50ms is selected as the default setting. 49
![](/manual_guide/products/hitachi-cpx3010n-user-manual-332a1d4/49.png)