Hitachi CPX305 Network Guide
Hitachi CPX305 - XGA LCD Projector Manual
 |
UPC - 050585151260
View all Hitachi CPX305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CPX305 manual content summary:
- Hitachi CPX305 | Network Guide - Page 1
Projector CP-X205/CP-X305 User's Manual (detailed) Network Guide This manual is only intended to explain Network Functions. For safety, operations or any other issues, refer to the Safety Guide or Operating Guide. WARNING • Before using this product, please read all manuals for this product. Be sure - Hitachi CPX305 | Network Guide - Page 2
requires maintenance or has encountered an error. (23) Projector Management using SNMP This projector is SNMP (Simple Network Management Protocol) compliant, allowing you to monitor it from a remote location using SNMP software. In addition, the projector is able to send failure & warning alerts to - Hitachi CPX305 | Network Guide - Page 3
settings. If using a network with DHCP enabled: The projector's network settings can be configured automatically when DHCP on the NETWORK menu is set to ON. Please refer to DHCP and INFORMATION in NETWORK menu ("NETWORK menu" section of the User's Manual - Operating Guide). If a fixed / static - Hitachi CPX305 | Network Guide - Page 4
browser for details on how to enable JavaScript. • If projector is disconnected from network approx. 50 seconds, system will automatically log off. be blocked if you are using Windows XP Service Pack 2, or using other security software. If Service Pack 2 blocks the window the following message will - Hitachi CPX305 | Network Guide - Page 5
security settings. (17) Projector Control Controls the projector. (19) Projector Status Displays and configures the current projector status. (22) Network Restart Restarts the projector's network connection. (22) Administrator User √ N/A N/A N/A N/A N/A N/A N/A √ √ N/A Below are the - Hitachi CPX305 | Network Guide - Page 6
projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser and press "Enter" key or click "Go" button. The screen the Fig.2 or Fig.3 screen will be displayed. Fig. 2 (Logon with Administrator ID) Fig. 3 (Logon with User ID) main menu main menu - Hitachi CPX305 | Network Guide - Page 7
Projector via a Web Browser Network Information All screen images displayed in this manual are screens of a logon using an Administrator ID. Any Administrator only functions will not be displayed when using a User ID. Refer to the descriptions in each table. Displays the projector's current network - Hitachi CPX305 | Network Guide - Page 8
settings. Item IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP) sysContact (SNMP) DNS Server Address Description Configures network settings. Enables DHCP. Disables DHCP. Configures the IP address when DHCP is disabled. Configures the - Hitachi CPX305 | Network Guide - Page 9
Configuring and Controlling the Projector via a Web Browser Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:9715) Port open Authentication Image Transfer Port (Port:9716) Port open - Hitachi CPX305 | Network Guide - Page 10
only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up to 255 characters. Sender Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. 10 - Hitachi CPX305 | Network Guide - Page 11
Manual - Operating Guide) "CHANGE THE LAMP" is displayed. "CHANGE THE LAMP" is displayed. Cold Start The power switch is turned on. (Off → standby mode) Authentication Failure The SNMP access is detected from the invalid SNMP community. Refer to "Troubleshooting" section of the User's Manual - Hitachi CPX305 | Network Guide - Page 12
projector screen. The e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500, 600, 700 or 800 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. ("OPTION menu" section of the User's Manual - Operating Guide) • Lamp - Hitachi CPX305 | Network Guide - Page 13
Configuring and Controlling the Projector via a Web Browser Schedule Settings Displays and configures schedule settings. Item Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday Specific date No.1 Specific date No.2 Specific date No.3 Specific date No.4 Specific date No.5 Description - Hitachi CPX305 | Network Guide - Page 14
and Controlling the Projector via a Web Browser Schedule Settings (Continued) The daily and weekly event items are shown below. Item Schedule Daily & Weekly Description Click the [Enable] check box to enable the schedule. Schedule List Displays the current schedule. The specific date event - Hitachi CPX305 | Network Guide - Page 15
Configuring and Controlling the Projector via a Web Browser Date/Time Settings Displays and configures the date and time settings. Item Current Date Current Time Daylight Savings Time Start Month Week - Hitachi CPX305 | Network Guide - Page 16
configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. • To enable the - Hitachi CPX305 | Network Guide - Page 17
Configuring and Controlling the Projector via a Web Browser Security Settings Displays and configures User authority Configures the User ID and password. User ID Configures the User ID. The length of the text can be up to 32 alphanumeric characters. User Password Configures the User password - Hitachi CPX305 | Network Guide - Page 18
Configuring and Controlling the Projector via a Web Browser Security Settings (Continued) Item Description Network Control Configures the authentication password for the command control. Authentication Password Configures the authentication password. The length of the text can be up to 32 - Hitachi CPX305 | Network Guide - Page 19
value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main range: • For a computer signal 0-48 • For a video, s-video or component video signal 0-16 Adjusts the brightness setting. Adjusts the contrast setting - Hitachi CPX305 | Network Guide - Page 20
Configuring and Controlling the Projector via a Web Browser Projector Control (Continued) Item Description Image Aspect Selects Selects the COMPONENT port setting. C-Video Format Selects the video format setting. S-Video Format Selects the s-video format setting. Frame Lock Turns the - Hitachi CPX305 | Network Guide - Page 21
and Controlling the Projector via a Web Browser Projector Control (Continued) Item Description Screen Language Selects the language to shut off the projector when no signal is detected. My Button-1 Assigns the function for the MY BUTTON1 button on the included remote control. My Button-2 - Hitachi CPX305 | Network Guide - Page 22
after clicking [Restart] button to log on again in order to further control or configure the projector via a web browser. • A link to the logon screen (6 : Fig. 1) is displayed after restarting the projector's network connection if the DHCP is set to ON. Logoff 22 When [Logoff] is clicked, the - Hitachi CPX305 | Network Guide - Page 23
the SMTP Port configuration settings have changed. Click [Network Restart] and configure the following items. 6) C lick [Mail Settings] and configure each item. Refer to the Mail Settings item in "Configuring and Controlling the Projector via a Web Browser" for further information (10). 7) Click - Hitachi CPX305 | Network Guide - Page 24
. Click [Alert Settings] on the main menu. 9) Select and configure each alert item. Refer to Alert Settings in "Configuring and Controlling the Projector via a Web Browser" for further information ( 11). 10) Click the [Apply] button to save the settings. Failure/Warning e-mails are formatted as - Hitachi CPX305 | Network Guide - Page 25
be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings Name on the screen that is displayed. NOTE • A Network Restart is required after the Community Name has been changed. Click [Network Restart] and - Hitachi CPX305 | Network Guide - Page 26
power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF one event has been scheduled for the same date and time (e.g., 'Specific date No. 1' has priority over 'Specific date No. 2' and so on). • Be sure to set the - Hitachi CPX305 | Network Guide - Page 27
check box to enable scheduling. 5) Enter the date (month/day) for specific date scheduling. 6) Click the [Apply] button to save the settings. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The - Hitachi CPX305 | Network Guide - Page 28
the Projector via a Web Browser" for further information. 3) Click the [Apply] button to save the settings. NOTE • A Network Restart correctly. Replace the battery by following the instructions on replacing the battery. ("Internal clock battery" section of the User's Manual - Operating Guide) - Hitachi CPX305 | Network Guide - Page 29
e-SHOT (Still Image Transfer) Display e-SHOT (Still Image Transfer) Display The projector can display a still image that is transferred via the network. Communication Port The following port is used for e-SHOT. TCP #9716 NOTE • e-SHOT is not available via communication ports (TCP #23 and TCP #9715) - Hitachi CPX305 | Network Guide - Page 30
your PC. You can download it from the Hitachi web site. Refer to the manual for the application for instructions. To display the transferred image, select the e-SHOT item in the NETWORK menu ("NETWORK menu" section of the User's Manual - Operating Guide). NOTE • It is possible to allocate the image - Hitachi CPX305 | Network Guide - Page 31
Command Control via the Network Command Control via the Network You can configure and control the projector via the network using RS-232C commands. web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the - Hitachi CPX305 | Network Guide - Page 32
) When the authentication setting is enabled, the following settings are required. (17) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. 9) Click the [Apply] button to save the settings. NOTE • The Authentication Password will - Hitachi CPX305 | Network Guide - Page 33
Command Control via the Network Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data - Hitachi CPX305 | Network Guide - Page 34
Command Control via the Network Command Format (Continued) Reply Data format The connection ID reply> Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication Error - Hitachi CPX305 | Network Guide - Page 35
Command Control via the Network Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
 |
 |
±
Projector
CP-X205/CP-X305
User’s Manual (detailed)
Network Guide
This manual is only intended to explain Network Functions.
For safety, operations or any other issues, refer to the Safety Guide or Operating
Guide.
• Before using this product, please read all manuals for this
product. Be sure to read Safety Guide first.
After reading, keep the manuals in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Contents
Network Functions
..................................................................
2
Configuring and Controlling the Projector via a Web Browser
...4
E-mail Alerts
..........................................................................
23
Projector Management using SNMP
......................................
25
Event Scheduling
...................................................................
26
e-SHOT (Still Image Transfer) Display
..................................
29
Command Control via the Network
.......................................
31
Trademark acknowledgement
• Windows is a registered trademark of Microsoft Corporation.
• Netscape is a registered trademark of Netscape Communications Corporation.
• JavaScript is a registered trademark of Sun Microsystems, Inc.
All other trademarks are the properties of their respective owners.