Hitachi CPX305 Network Guide - Page 9
Port Settings
![]() |
UPC - 050585151260
View all Hitachi CPX305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Configuring and Controlling the Projector via a Web Browser Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:9715) Port open Authentication Image Transfer Port (Port:9716) Port open Authentication SNMP Port Port open Trap address SMTP Port Port open Description Configures command control port 1 (Port:23). Click the [Enable] check box to use port 23. Click the [Enable] check box when authentication is required for this port. Configures command control port 2 (Port:9715). Click the [Enable] check box to use port 9715. Click the [Enable] check box when authentication is required for this port. Configures the image transfer port (Port:9716). Click the [Enable] check box to use port 9716. Click the [Enable] check box when authentication is required for this port. Configures the SNMP port. Click the [Enable] check box to use SNMP. Configures the destination of the SNMP trap in IP format. Configures the SMTP port. Click the [Enable] check box to use the e-mail function. Click the [Apply] button to save the settings. NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
![](/manual_guide/products/hitachi-cpx305-network-guide-fbeefc1/9.png)