Hitachi CPX305 Network Guide - Page 8

Configuring and Controlling the Projector via a Web Browser Network Settings Displays and configures network settings. Item IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP) sysContact (SNMP) DNS Server Address Description Configures network settings. Enables DHCP. Disables DHCP. Configures the IP address when DHCP is disabled. Configures the subnet mask when DHCP is disabled. Configures the default gateway when DHCP is disabled. Configures the name of the projector. The length of the Projector Name can be up to 64 alphanumeric characters. Numbers '0-9' and alphabet 'a-z', 'A-Z' and symbols can be used. Configures the location to be referred to when using SNMP. The length of the sysLocation can be up to 255 alphanumeric characters. Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used. Configures the contact information to be referred to when using SNMP. The length of the sysContact can be up to 255 alphanumeric characters. Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used. Configures the DNS server address. Click the [Apply] button to save the settings. NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses.