Hitachi DK23DA-30F Owners Manual - Page 43
Device detected CBLID- above V
View all Hitachi DK23DA-30F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Word Table 6.5 Identify Device Information (Continued) Description 91 Current advanced power management level value Word 91 contains the current Advanced Power Management level settings. 92 Master password revision code Word 92 contains the value of the Master password revision code set when the Master Password was last changed. 93 Hardware reset result Bit 15 0 (fixed) Bit 14 1 (fixed) Bit 13 Bit 12 - 8 1 = Device detected CBLID- above ViH 0 = Device detected CBLID- below ViL Device 1 hardware reset result. Device 1 clears these bits to zero. Device 1 sets these bits as follows: Bit 12 0 = Reserved Bit 11 1 = Device 1 asserted PDIAG- Bit 10 - 9 These bits indicate how Device 1 determined the device number: 00, 11 = Reserved 01 = A jumper was used 10 = the CSEL signal was used Bit 8 1 (fixed) Bit 7 - 0 Device 0 hardware reset result. Device 1 clears these bits to zero. Device 0 sets these bits as follows: Bit 7 0 = Reserved Bit 6 1 = Device 0 responds when Device 1 is selected Bit 5 1 = Device 0 detected the assertion of DASP- Bit 4 1 = Device 0 detected the assertion of PDIAG0 Bit 3 1 = Device 0 passed diagnostic Bit 2 - 1 These bits indicate how Device 0 determined the device number: 00, 11 = Reserved 01 = A jumper was used 10 = the CSEL signal was used Bit 0 1 (fixed) 94-126 Reserved Value (HEX.) 40XXh XXXXh XXXXh 0000h K6602705 Rev.3 08.20.01 - 43 -