Hitachi L42A403 Owners Guide - Page 8

How To Install Your New Hitachi LCD Television WALL MOUNTING SETUP STEP (1) : REMOVE THE STAND BASE FROM THE LCD TELEVISION In order to remove the stand from the TV, please put the TV set on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage; then remove the 4 screws shown below in order to separate the TV from the Table Top Stand. Now the Stand can be separated from the TV. Useful dimensions for the WALL MOUNT assembly are in page 39 and 40. (a) (a) (b) (b) 4 Screws ( (a) M4 and (b) tapping screws) Do not mix please. Stand Base STEP (2) : INSTALL THE WALL MOUNT BRACKETS ON THE LCD TELEVISION USING 4 SCREWS. Screw Mounting Holes (4 places). Don't use the original screws (A) were in the TV for the Table Top Stand. The original screws are not long enough to properly secure the TV to the wall bracket. Screw Length (A) Insertion length (B) Spring Washer (C) Plane Washer (D) Wall Mount Bracket (E) Wall Mount Brackets For Wall Mount assembly; please refer to the Installation Manual of the Wall Mount Unit. Example : A = B+C+D+E A: 13.5~15.5 mm. B: 8.5~10.5 mm. C: 1 mm. D: 1 mm. E: 3 mm. The screw type :Thread ISO M6 (Metric type, do not use Standard type). CAUTION Insertion length (B) of the screws must be within 8.5~10.5 mm. If the length is less than 8.5 mm, the weight can not be maintained. If the length is more than 10.5 mm, a space is created between the Wall Mount Bracket and the LCD Television. This length is very important. STEP (3) : TIPS TO CONSIDER FOR THE LOCATION OF THE LCD TELEVISION. More than 10 cm (4"). More than 30 cm (1'). Keep more than 2 cm (0.8") away from the wall. •• Do not block the ventilation holes. In CAUTION addition please keep a certain distance around and make sure not to obstruct ventilation. Blocking the ventilation holes might cause fire or defect. •• If you purchased a Wall Mount bracket, please ask for a professional installation. Do not install by yourself. •• This LCD unit features an advanced ventilation system configured for vertical installation. A knowledgeable and experienced professional technician can perform other mounting or installation orientations (e.g., horizontal, tilted) provided that you specifically inform the technician of the unit's specialized ventilation needs. Call 800-HITACHI for additional info and guidance. Although this LCD Display Panel can be installed using a variety of third party wall mounting brackets/devices, CAUTION such third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with this LCD Display Panel. Accordingly, Hitachi accepts no responsibility or liability for any injuries or property damage resulting from the use of such third party brackets/devices. Hitachi strongly advises that any installation of this LCD Display Panel using wall mounting brackets/devices be performed only by a qualified and experienced television installation technician who has completed a thorough evaluation of: a) the weight-bearing strength and stability of the intended wall mount surface; and b) the weight-bearing strength and compatibility of the intended wall mount brackets/device. 8