Hitachi PJ TX100 Owners Guide - Page 19

ENGLISH Multifunctional settings PICTURE Menu With the PICTURE menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT BRIGHT +0 CONTRAST +0 GAMMA DEFAULT 1 COLOR TEMP 6500K COLOR +0 TINT +0 SHARPNESS +0 PROGRESSIVE TURN OFF MY MEMORY SAVE 1 Item BRIGHT CONTRAST Description Adjust the brightness using the ▲/▼ buttons. : Light Dark Adjust the contrast using the ▲/▼ buttons. : Strong Weak Select a GAMMA mode using the ▲/▼ button. : #1 DEFAULT #1 CUSTOM #2 DEFAULT #2 CUSTOM GAMMA COLOR TEMP COLOR TINT #4 CUSTOM #4 DEFAULT #3 CUSTOM #3 DEFAULT The radio button of the selected will indicate. CUSTOM mode Selecting the CUSTOM and then pressing the ► (or the ENTER) button calls the dialog shown in right. Choose an item using the ◄/► buttons, and adjust the level using the ▲/▼ buttons. : memo When you press the ENTER button, the test pattern for checking appears on the screen. ( 21) ENTER : 1 23 4 56 7 8 +0 +0 +0 +0 +0 +0 +0 +0 GAMMA [CUSTOM 1] Select a color temperature using the ▲/▼ buttons. : 9300K 8500K 8000K 7500K 6500K DYNAMIC CUSTOM Selecting CUSTOM and pressing the ► button make the adjustment enabled. ENTER : OFFSET RG B GAIN RG B CUSTOM mode Select a color item of OFFSET or GAIN using the ◄/► buttons, and adjust the level +0 +0 +0 +0 +0 +0 using the ▲/▼ buttons. : COLOR TEMP memo When you press the ENTER button, the test pattern for checking appears on the screen. ( 21) Adjust the whole color using the ▲/▼ buttons. : Strong Weak memo This item can be selected only at a video signal. memo This function doesn't work with some input signal formats. Adjust the tint using the ▲/▼ buttons. : Green Red memo This item can be selected only at a video signal. 19