Hitachi PJ TX100 Owners Guide - Page 27

ENGLISH Multifunctional settings SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT LANGUAGE ENGLISH MENU POSITION OSD BRIGHT 5 START UP ORIGINAL MyScreen MyScreen Lock TURN OFF MESSAGE TURN ON Item LANGUAGE Description Select a menu language using the ▲/▼ buttons. : ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO NORSK NEDERLANDS PORTUGUÊS SVENSKA SUOMI POLSKI Adjust the menu position using the buttons.: Up MENU POSITION OSD BRIGHT START UP My Screen My Screen Lock Left Right Down To quit the operation, press the "MENU" button or keep no operation for 50 seconds. Select a brightness level of the OSD on the screen using the ▲/▼ buttons. : BRIGHT DARK Select a type of the START UP screen using the ▲/▼ buttons. : MyScreen ORIGINAL TURN OFF The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. When the TURN OFF is selected, the BLUE is used. memo The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed. memo About the MyScreen, please refer to the item "MyScreen" in this table. Pressing the ► (or the ENTER) button starts the MyScreen registration. Please see the flow chart on the following page. Select the TURN ON or the TURN OFF using the ▲/▼ buttons. : TURN ON TURN OFF The TURN ON disables the operation of the item "MyScreen" of this SCREEN menu. 27