Honeywell 2092D Operation Guide - Page 7

Programming a Personal Passcode Programming a Personal Passcode For security reasons, it is very important that you program your own personal Passcode into the digital lock. The factory Passcode 159 should be changed immediately. To program your own unique 3-8 digit Passcode, follow these steps: 1. Open the protective cover on the front of the safe to expose the keypad. 2. With the safe in the open position, press in on the small reset button located on the inside top edge of the door. Passcode reset button NOTE: After pressing the reset button, the red and green lights on the keypad will flash to indicate the programming is authorized and you have 10 seconds to begin. 3. Enter your new 3-8 digit Passcode followed by the # Key. Immediately repeat the sequence, beginning with the new Passcode followed by the # Key. 4. The green light will light up solid, indicating your new Passcode has been successfully entered. GREEN LIGHT 5. Your new Passcode will now be comprised of the 3-8 digit sequence you selected, always followed by the # sign. The factory pre-set Passcode will no longer open the safe. 6. You may change your Passcode at any time by repeating the same steps. 7. It is important that you write down your personal Passcode and secure it in a safe location away from the safe. NOTE: If you forget your personal Passcode, access to the safe can be made using the Emergency Override Key. (See page 6) Home and Office Security Safes 5