Honeywell 3800gPDF User Guide - Page 23
IBM 4683 Ports 5B, 9B, and 17 Interface, IBM 4683 Port 9B HHBCR-1 Interface
![]() |
View all Honeywell 3800gPDF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
All communication parameters between the imager and terminal must match for correct data transfer through the serial port using RS-232 protocol. Scanning the RS-232 interface bar code, programs the imager for an RS-232 interface at 38,400 baud, parity-none, 8 data bits, 1 stop bit, and adds a suffix of a CR LF. RS-232 Interface Refer to page 2-8 for additional RS-232 configuration settings. IBM 4683 Ports 5B, 9B, and 17 Interface Scan one of the following "Plug and Play" codes to program the 3800GX5E for IBM 4683 Port 5B, 9B, or 17. Note: After scanning one of these codes, you must power cycle the cash register. IBM 4683 Port 5B Interface IBM 4683 Port 9B HHBCR-1 Interface IBM 4683 Port 9B HHBCR-2 Interface IBM 4683 Port 17 Interface 1 - 7
![](/manual_guide/products/honeywell-3800gpdf-user-guide-40c8309/23.png)
1 - 7
All communication parameters between the imager and terminal must match for
correct data transfer through the serial port using RS-232 protocol.
Scanning
the RS-232 interface bar code, programs the imager for an RS-232 interface at
38,400 baud, parity–none, 8 data bits, 1 stop bit, and adds a suffix of a CR LF.
Refer to
page 2-8
for additional RS-232 configuration settings.
IBM 4683 Ports 5B, 9B, and 17 Interface
Scan one of the following “Plug and Play” codes to program the 3800GX5E for
IBM 4683 Port 5B, 9B, or 17.
Note:
After scanning one of these codes, you must power cycle the cash
register.
RS-232 Interface
IBM 4683 Port 5B Interface
IBM 4683 Port 9B HHBCR-1 Interface
IBM 4683 Port 17 Interface
IBM 4683 Port 9B HHBCR-2 Interface