Honeywell 3800gPDF User Guide - Page 75
Interleaved 2 of 5 Message Length
![]() |
View all Honeywell 3800gPDF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
When Check Digit is set to Validate and Transmit, the imager only reads Interleaved 2 of 5 bar codes printed with a check digit, and will transmit this digit at the end of the scanned data. Default = No Check Digit. * No Check Digit Validate, but Don't Transmit Validate and Transmit Interleaved 2 of 5 Message Length Scan the bar codes below to change the message length. Refer to Message Length on page 7-2 for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Minimum Message Length Maximum Message Length 7 - 9
![](/manual_guide/products/honeywell-3800gpdf-user-guide-40c8309/75.png)
7 - 9
When Check Digit is set to
Validate and Transmit
, the imager only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, and will transmit this digit at
the end of the scanned data.
Default = No Check Digit.
Interleaved 2 of 5 Message Length
Scan the bar codes below to change the message length.
Refer to
Message
Length
on page 7-2 for additional information.
Minimum and Maximum
lengths = 2-80.
Minimum Default = 4, Maximum Default = 80.
Validate, but Don’t Transmit
* No Check Digit
Validate and Transmit
Minimum Message Length
Maximum Message Length