Honeywell 4800dr Barcode Guide - Page 10
Connecting the Document Reader with TTL-232 Serial Port, Document Reader Models - manual
![]() |
View all Honeywell 4800dr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1. Connect the appropriate interface cable to the document reader first, then to the computer. 2. Program the document reader for a USB interface using the Plug and Play barcodes beginning on page 1-3. 3. The document reader beeps. 4. Verify the document reader operation by scanning a barcode from the Sample Symbols in the back of this manual. For additional USB programming and technical information, refer to Honeywell "USB Application Note," available at www.honeywell.com/aidc. Connecting the Document Reader with TTL-232 Serial Port Note: See "Document Reader Models" on page 1-1 to determine which interfaces apply to your document reader. 1. Turn off power to the terminal/computer. 2. Connect the appropriate interface cable to the document reader. Note: For the document reader to work properly, you must have the correct cable for your type of terminal/computer. 3. Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the port. 1 - 2
![](/manual_guide/products/honeywell-4800dr-barcode-guide-307876b/10.png)