Honeywell HW7500E Service Manual - Page 21
Preparing for Service, Required Tools, Transporting Generator
UPC - 894190002049
View all Honeywell HW7500E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
5: PREPARING FOR SERVICE WARNING ANYONE using or servicing this generator must read, understand, and follow all safety and operation instructions provided in this manual. Failure to closely follow these instructions can result in circumstances leading to death, serious injury, and property damage. 5.1 REQUIRED TOOLS A complete set of standard and metric shop tools are required to service the generator. Also needed are: • Hammer • Torque wrench • Volt-ohm meter • Frequency meter • Resistive load - such as a load bank, heaters, light bulbs, etc. • Alternator removal tool • Wood block (for rotor support) 5.2 TRANSPORTING GENERATOR WARNING Hot engine or exhaust system can cause serious burns or fires. Cool generator completely before transporting. When moving or transporting the generator: • Press the engine control switch to the STOP position. • Turn the fuel shut-off valve to the OFF position. • Keep the generator level to prevent fuel spillage. • Place pins in the handle and handle bracket before moving the generator. NOTICE NEVER drop, strike, or place heavy objects on generator when transporting. Honeywell Portable Electrical Generator Service Manual www.honeywellgenerators.com 5-1