Honeywell Q682B Owner's Manual - Page 20
may be off on safety.
 |
View all Honeywell Q682B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Troubleshooting (continued) Problem Clock does not run (continued). Clock loses time. Check Action - pins in program dial. If pins are not completely seated in program dial, jamming with index wheel may occur. Push down on pins to make sure they are completely seated in program dial. - power. May be interrupted. Make sure power is on. Reset clock. - high limit control. If clock powered Wire separate transformer to power clock, or through system transformer, install backup batteries as shown on page 8. power to clock and equipment may be off on safety. - filter. May be clogged. Safety limit on equipment may cut off power to system. Replace filter and reset clock. (continued) 69-0574-2 20
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
26
-
27
-
28
 |
 |
69-0574—2
20
Troubleshooting
(continued)
(continued)
Problem
Check
Action
Clock does not run
(continued)
.
—
pins in program dial.
If pins are
not completely seated in program
dial, jamming with index wheel
may occur.
Push down on pins to make sure they are
completely seated in program dial.
Clock loses time.
—
power.
May be interrupted.
Make sure power is on.
Reset clock.
—
high limit control.
If clock powered
through system transformer,
power to clock and equipment
may be off on safety.
Wire separate transformer to power clock, or
install backup batteries as shown on page 8.
—
filter.
May be clogged.
Safety
limit on equipment may cut off
power to system.
Replace filter and reset clock.