Hoover F5808 Manual - Page 4
Attach upper handle - model
View all Hoover F5808 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Assembled models with attached tools will look like this drawing. Assembled models without attached tools will look like this drawing. 1-2 1-3 1-4 A B Attach upper handle Remove clean solution tank (upper tank) from carpet cleaner. Remove nozzle stored on upper handle by gently pushing nozzle downward while pivoting it away from the handle at (A). With cord hook (B) to back of carpet cleaner, push upper handle down onto lower handle. 1-5 1-6 1-7 C Push bolts into holes on front of handle. If bolts will not go through hole easily handle is not pushed completely down. 4 Place nuts in recessed areas on back of handle. Hold each nut in place while tightening each bolt securely (from the front of the handle) with a Phillips screwdriver. Only two nuts are needed on this model. The extra nut is not required but has been provided for your convenience. When handle sections are completely together, squeeze trigger (C) on upper handle to snap trigger rod in place.