Hoover FH46000V Product Manual English - Page 3

Hours

Get Hoover FH46000V PDF manuals and user guides View all Hoover FH46000V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

SELF-CLEANING FUNCTION CAUTION: Water will drip from the brush roll and underside of the product after use and may puddle. To avoid damage to wood and laminate flooring and to avoid potential slip hazard after use (A) do not need the product on wood and laminate surfaces and (B) placed unit on provided storage tray to contain drips. 4 Self-clean will run for 90 seconds and automatically switch off when complete. EMPTYING DIRTY WATER TANK PINCH SIDES AND PULL 3 Empty the tank and rinse. 2 Pull the tab up on the outer side of the brush roll and pull up to remove. 1 Place the unit upright in the self-clean tray. 2 Plug cleaner into an outlet. It must be plugged in for the self-cleaning function to run. 3 Press the self-clean button to start the cleaning cycle. 1 Once self-cleaning is done. Remove dirty water tank. To remove the tank, press down on the release latch on the front of the tank and pull the tank away from the unit. 2 Remove filter from top of dirty water tank, rinse with water and place in the designated area on self-clean tray 4 Leave tank and lid out to dry before placing back in machine TIP: Use for picking up small liquid spills (one gallon or less, never to exceed 1/8" in depth). When vacuuming liquid, make sure the product does not get submerged or doused in liquid, which could cause shock, product failure, or personal injury. Ensure filter dries for 24 hrs before reinserting into machine for next use. CLEANING THE BRUSH ROLL & FOOT WARNING: To reduce the risk of injury from moving parts unplug before servicing. Do not use cleaner without nozzle in place. LUBRICATION: The motor and brush roll are equipped with bearings which contain sufficient lubrication for their lifetime. The addition of lubricant could cause damage. Do not add lubricant to motor or brush roll. PINCHING CLIPS 3 Rinse the brush roll and brush roll cover in water. 24 HOURS 4 The brush roll can be dried and stored in the self-clean tray. 1 Press the clips on the brush roll cover and lift cover to remove.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
SELF-CLEANING
FUNCTION
CAUTION:
Water will drip from the
brush roll and underside of the product after
use and may puddle. To avoid damage to wood
and laminate flooring and to avoid potential slip
hazard after use (A) do not need the product on
wood and laminate surfaces and (B) placed unit
on provided storage tray to contain drips.
1
Place the unit upright in the self-clean tray.
2
Plug cleaner into an outlet. It must be plugged in
for the self-cleaning function to run.
3
Press the self-clean button to start the cleaning
cycle.
4
Self-clean will run for 90 seconds and
automatically switch off when complete.
EMPTYING DIRTY WATER TANK
1
Once self-cleaning is done. Remove dirty water
tank. To remove the tank, press down on the
release latch on the front of the tank and pull the
tank away from the unit.
2
Remove filter from top of dirty water tank, rinse
with water and place in the designated area on
self-clean tray
PINCH SIDES AND PULL
3
Empty the tank and rinse.
4
Leave tank and lid out to dry before placing back
in machine
TIP
: Use for picking up small liquid spills (one
gallon or less, never to exceed 1/8” in depth).
When vacuuming liquid, make sure the product
does not get submerged or doused in liquid,
which could cause shock, product failure, or
personal injury. Ensure filter dries for 24 hrs
before reinserting into machine for next use.
CLEANING THE BRUSH
ROLL & FOOT
WARNING:
To reduce the risk of injury
from moving parts unplug before servicing. Do
not use cleaner without nozzle in place.
LUBRICATION
: The motor and brush roll are
equipped with bearings which contain sufficient
lubrication for their lifetime. The addition of
lubricant could cause damage. Do not add
lubricant to motor or brush roll.
PINCHING CLIPS
1
Press the clips on the brush roll cover and lift
cover to remove.
2
Pull the tab up on the outer side of the brush roll
and pull up to remove.
3
Rinse the brush roll and brush roll cover in water.
24
HOURS
4
The brush roll can be dried and stored in the
self-clean tray.