Hoover FH50700 Product Manual - Page 10
Maintenance
View all Hoover FH50700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Maintenance How to Empty and Clean your Tanks Dirty Water Tank 1 Turn the cleaner off and unplug from electrical outlet. WARNING: Risk of personal injury - Brush roll may suddenly restart. Turn power switch off and unplug before cleaning or servicing. 4 Open Quick Pour Spout and empty. 5 Replace and close the Quick Pour Spout. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center or call customer service at 1 (800) 944-9200 prior to continuing use. Clean Water Tank 1 Remove tank from the unit. 2 Press latch and remove Dirty Water Tank from the back of the unit. 6 Prior to replacing tank, check and clean filter as needed. 2 Unscrew cap. Empty tank, rinse and allow to air dry. 3 Carry Dirty Water Tank in an upright position and place on a flat surface. 10 7 Replace Dirty Water Tank by tilting back then rocking it forward to snap into place. 3 Replace the tank once it is clean and dry.