Hoover FH50700 Product Manual - Page 7
How to Assemble, Before You Begin Cleaning, Pretreating, Assembly Instructions
View all Hoover FH50700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly Instructions How to Assemble Fully assemble or install product prior to use. 1 Insert the Upper Handle into the Upper Handle Pole until you hear a "CLICK". 2 Insert the upper Handle Pole into the base until you hear a "CLICK". 3 Slide the Clean Water Tank securely into place on the back of the unit. Push down firmly. Before You Begin Cleaning 1. Vacuum carpet and upholstery thoroughly with a Hoover vacuum before use. Don't use the carpet cleaner as a traditonal vacuum cleaner. 2. Use your Hoover carpet cleaner only if upholstery fabric is marked with a "W" (for "wet" clean) or "S/W" (for "solvent/dry" or "wet" clean). Don't clean fabric marked "S" ("solvent/ dry" clean only). 3. Test for colorfastness in a small, hidden area. Gently rub surface with a dampened white cloth. Wait ten minutes and check for color removal or bleed with a white paper towel. Pretreating For best results, pretreat stains with a Hoover spot treatment (see Hoover Cleaning Solution Guide) to help loosen and remove even the most stubborn stains. NOTE: To avoid damage to wood floors underneath area rugs or carpet, place waterproof material (ex: plastic) underneath them before cleaning. NOTE: To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray. 7