Hoover FH50700 Product Manual - Page 13
Belt Maintenance - motor
View all Hoover FH50700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Maintenance Belt Maintenance HOW TO REPLACE 1 Place new belt on motor shaft. 2 Slip brushroll through belt. 3 Position non-belt side end cap of brushroll into pocket. 4 Carefully stretch belt to locate other end cap into pocket, making sure that the end caps are in their correct orientation. 5 Replace belt covers and secure by replacing all 6 screws. *in front of wheel STORAGE: Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet cleaner on a carpeted or wood surface. 13
13
Place new belt on motor
shaft.
Position non-belt side
end cap of brushroll into
pocket.
Replace belt covers and
secure by replacing all 6
screws.
1
3
5
2
4
Slip brushroll through
belt.
Carefully stretch belt to
locate other end cap into
pocket, making sure that
the end caps are in their
correct orientation.
Maintenance
Belt Maintenance
HOW TO REPLACE
*in front of wheel
STORAGE: Allow brushes and underside of carpet
cleaner to air dry thoroughly before storing carpet
cleaner on a carpeted or wood surface.