Hoover S3330 Manual - Page 3

Questions or Concerns? This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance during assembly or operation, Visit us online at www.hoover.com to find the service outlet nearest you (click on the "Service" button) OR Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. 1. Assembling cleaner Carton contents 1-1 A B C Unpack cleaner from carton and identify the parts shown. Remove and dispose of packing. A. Canister cleaner B. Rug and floor nozzle C. Filter bag (installed in canister) D. Hose E. Telescopic wand E D Connecting hose, wand and nozzle 1-2 Connect hose Push hose connector into opening in bag lid. To disconnect hose, depress buttons on hose connector and pull up. 1-3 1-4 A 1-5 D E B C Attach wand, tools and nozzle To attach wand to hose, push wand firmly onto hose; twist wand to align the arrow on the hose (A) with the arrow on the end of the wand (B). Lift tool lid to reveal tool storage compartment (see Fig. 2-8). To attach tools to the hose or the wand, push tool firmly onto hose. Twist tool slightly to tighten or loosen connection. To attach the nozzle to the wand, push the nozzle firmly onto the wand. Align the arrow on the nozzle connector (C) with the arrow on the end of the wand (D). To adjust the telescoping wand, press on spring latch (E) and pull up on upper portion of wand. Adjust wand to desired length. Release latch to lock the wand in position. 3