Hoover SmartWash PET Complete Automatic Bundle Product Manual English - Page 20

Tools and Accessories CAUTION Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at the bottom of stairs or on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage. Cleaning Carpeted Stairs and Upholstery 1 9 Read "Before you Begin Cleaning" instruction on page 9. Pre-spray the area by holding the tool about one inch above the carpet 9 and push it forward while pressing 2 Attach hose as instructed (page 18). the trigger. 3 Place handle in upright position. FlexForce™ PET PowerBrushes will not rotate while handle is in the upright position. 10 Slightly press the tool switch into area cleaning. Press the trigger and pull the tool slowly over the carpet. Release trigger at end of stroke. 4 Fill Clean Water Tank according to instructions. 11 11 Lift tool, and position it against Nozzle. Pull tool slowly over carpet 5 Fill Solution Tank with HOOVER® solution according to instructions on page 10. without pressing trigger. 6 Attach tool to end of hose. 12 Overlap strokes by ½ inch to help prevent streaking. 7 13 Dry hands and plug cleaner into a properly grounded outlet. It is best to alternate wet and dry strokes as described in steps. 8 Turn cleaner ON. 20 Tips To avoid saturating carpet, do not use more than 4 wet strokes over any one area. Always end with dry strokes. If additional cleaning is necessary, wait until the carpet is completely dry before using the tool again. Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss of suction. You will also see the float rise and shut off suction at the same time. When finished cleaning, follow "After Cleaning" and "After Using Tool" instructions.