Hoover UH70040W Product Manual - Page 3
Cleaner assembly - parts for
View all Hoover UH70040W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
If you need any assistance: Visit our website at hoover.com. Click on the "Service" button to find the service outlet nearest you OR Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a representative in our Consumer Response Center. Please do not return this product to the store. 1. Cleaner assembly Carton contents 1-1 A A. Handle section B. Cleaner base assembly C. Cleaner upper housing assembly D. Cleaning tools and wands E. Hose D B C E Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing materials. Attach upper housing 1-2 B 1-3 1-4 C A Remove dirt cup (A) from upper housing (B) by pressing dirt cup release button (C) and pivoting cup out. Set dirt cup aside. Using a Phillips screwdriver, remove (3) screws from cleaner base. DO NOT DISPOSE OF SCREWS. Remove cardboard and discard. Align upper housing (D) over cleaner base (E) and slide down until upper housing sits securely over base. 1-5 1-6 1-7 Using a Phillips screwdriver, fasten (3) screws located at the bottom of the upper housing. Place bottom of dirt cup into cleaner body first. Pivot cup into cleaner body. Press on dirt cup release button while firmly pressing on dirt cup. Release button in order for it to return to proper position and lock the dirt cup into place. Continued § 3