Hoover WH10201 Product Manual - Page 4
How To Use, Features
View all Hoover WH10201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Features: 3 1 Air Purifier Door: Easily remove to gain access to the filter. 2 Main Filter: Filter particles from the air that passes through the filter. 3 Odor Filter: Reduce odors from the air that passes through the filter. 4 Intake Grille: Where air enters the unit. 5 Check Main Filter Light: Indicates the main filter may need to be replaced when lit. 6 Check Odor Filter Light: Indicates the odor filter may need to be replaced when lit. 7 Check Light Reset Button: This button resets both the main filter and odor filter lights. 8 Timer: Set the run time for two, four or eight hour, before automatically turning OFF. 9 Fan Speed: The fan runs at three speeds. The lights indicate the current fan speed. L: Low for the Silence Technology® M: Medium for typical use H: High for maximum cleaning 10 Power: Turn the unit ON (I=ON) and OFF (0=OFF). 11 Exhaust Grille: Direct the flow of air as it exits the unit. *Varies per model How To Use: •IMPORTANT • This unit is equipped with a smart panel that senses your touch. Heavy pushing of buttons is not recommended. FRONT 1 CHECK the air purifier for the filters. Be sure the supplied filters are properly in place and all plastic is removed before turning the unit on. *Varies per model HORIZONTAL POSITION 2 PLACE the air purifier on a hard surface such as the floor, a table or desk. Be sure the grilles are not blocked by other objects, and there are no candles or flames near the unit. The air purifier can be placed in a horizontal or vertical position. 3 PLUG IN into nearest standard electrical outlet. 4 LIGHTLY TOUCH the power button to turn the air purifier on. Touch the power button again to turn the air purifier off. 5 SELECT THE FAN SPEED To select the speed, lightly touch and release the fan speed button until the desired speed is reached. L = low, Silence Technology®, M = medium or H = high. 6 ADJUST THE TIMER feature. The time can be selected from two, four or eight hours. The unit will turn off once it runs for the selected hours. Note: The unit will run continuously if all the timer lights are off. 7 THE CHECK FILTER LIGHTS will light up when the filters need to be replaced. Touch and hold the button for several seconds until the filter indicator shuts off. 4