Hotpoint GSM2260NSS Installation Instructions - Page 2
Installation Preparation
View all Hotpoint GSM2260NSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation Preparation PARTS SUPPLIED IN INSTALLATION PACKAGE: ■ Two #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop ■ Junction box cover and #10 hex-head screw ■ Hose clamp ■ Drain hose (approximately 78" long) ■ Zip ties ■ Side and top trim pieces (some models) ■ Literature, samples and/or coupons ■ 2 Side-mounting brackets with four #8 pan-head mounting screws for non-wood countertops (some models) Side and Top Trim Pieces on some models Drain Hose Hose Clamp Screw Kit Side Mount Kit (some models) Zip Ties #8 Phillips #10 Special Hex-Head Head Screws J-Box Screw 5/8" long 1/2" long #8 Phillips Pan-head Screws 3/8" long for side-mounting SideMounting Brackets Junction Box Cover MATERIALS YOU WILL NEED: ■ Ferrule, compression nut and 90° elbow (3/8"NPT external thread on one end, opposite end sized to fit water supply) ■ Thread seal tape ■ UL-listed wire nuts (3) ■ GPF65 side-mount kit if countertop is granite or similar material 90° Elbow, Ferrule and Compression Nut Hand Shut-Off Valve Thread Seal Tape Wire Nuts (3) Materials Needed for New Installations: ■ Air gap for drain hose, if required ■ Waste tee for house plumbing, if applicable ■ Electrical cable or power cord ■ Screw-type hose clamps ■ Strain relief for electrical connection ■ Hand shut-off valve (recommended) ■ Water line-3/8" minimum copper tubing ■ GPF10L drain hose (10' long), if needed Waste Tee Electrical Cable (or Power Cord, if applicable) Hot Water Line Air Gap GPF65 Side-Mount Bracket Kit Hose Clamps Strain Relief Optional 10' Drain Hose GPF10L TOOLS YOU WILL NEED: ■ Phillips-head screwdriver ■ 1/4" and 5/16" nutdriver ■ 6" Adjustable wrench ■ Level Phillips-Head Screwdriver ■ Carpenter's square ■ Measuring tape ■ Safety glasses ■ Flashlight ■ Bucket to catch water when flushing the line 15/16" Socket ■ 15/16" socket (optional for skid removal) ■ Gloves For New Installations Only: ■ Tubing cutter ■ Drill and appropriate bits ■ Hole saw set Flashlight Gloves 2 Level 1/4" and 5/16" Nutdriver 6" Adjustable Wrench Carpenter's Square Tubing Cutter Measuring Tape Safety Glasses Bucket Hole Saw Set Drill and Bits