Hotpoint NWXR483GGWW Installation Instructions - Page 8

Installation Instructions ADDING ELBOW FOR EXHAUST THROUGH BOTTOM OF CABINET • Insert the elbow through the rear opening and connect it to the dryer internal duct. • Apply duct tape on the joint between the dryer internal duct and elbow, as shown on page 7. 13 CHANGING DIRECTION OF DOOR OPENING REMOVE 4 HINGE SCREWS. REMOVE 4 HOLE PLUGS AND PLACE THEM IN THE HOLES ON THE OPPOSITE SIDE. CAUTION: Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard. ADDING COVER PLATE TO REAR OF CABINET ROTATE DOOR 1800 AND REINSTALL. PLATE (KIT WE1M454) PLATE (KIT WE1M454) Connect standard metal elbows and ducts to complete the exhaust system. Cover back opening with a plate (Kit WE1M454) available from your local service provider. Place dryer in final location. WARNING - NEVER LEAVE THE BACK OPENING WITHOUT THE PLATE. 14 SERVICING TO REGISTER YOUR DRYER CALL TOLL-FREE 1-888-269-1192 Prompt registration confirms your right to protection under the terms of your warranty. www.GEAppliances.com For Questions on Installation, Call: 1-800-626-2000 (US) or 500A420P003 1-800-361-3400 (Canada). PPuubb. .##3311--1156417369 8 WARNING - LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION AFTER SERVICING/INSTALLATION. For replacement parts and other information, refer to Owner's Manual for servicing phone numbers.